By means of the protective housing you can use the Starpyranometer type 8101/8102 for measurement the whole year through.
* absolutely no influence on the measuring system |
* all-season measurements |
* world-wide continuous working |
Its two functions are ventilation with the help of a robust industrial ventilator and electrical heating for supporting of the ventilation during condensation of dew, rain and snow. Supplementary installation of the Starpyranometer can easily be done.
|
|
| Housing: | RAL 7001 painted white |
| Cable: | 2 x 2 - polar shielded, length 3m |
| Power supply: | 24V AC, 80VA |
| lnstallation: | on a supporting pipe 33mm diam. with 6 ea hollow screw M6 material: stainles steel, staggered 120° |
| Switch point heating: | appr. +10°C |
| Weight: | 2.5 kg net weight, 2.75 kg gross weight |
| Order code: | B1810600 |
Installation directions: To remove the support bar for the upmost dome please spread the clip very carefully. To remove the upmost dome please lift it cautiously. Shorten the cable of the Starpyranometer to a length of appr. 20 cm. The Starpyranometer is mounted on the mounting plate by means of 3 levelling screws. Screw the cable of the Starpyranometer against the connecting block. Please mind, that you connect the same cable colours. The upmost dome and the support bar have to be mounted in the contrary succession.